Seetronic J5F2C 5 Pin XLR Male Panel Mount Connector
Designed to panel mount into a standard D-series punch-out. The standard knockout for a D-series product is approximately 0.840" or 21.3mm. 27/32" will also work.
Since the method of mounting a panel-mount D-series connector varies, the mounting screws or rivets are not included with this connector.
Screws used for chassis connectors depend on panel material and panel thickness. We suggest the following:
- METAL PANEL (with drilled hole that is not threaded) - Flat head thread forming screws, Pozidriv (recommended) or Phillips, M3 x length (drilled hole ~ 3.1 mm)
- METAL PANEL (with M3 threaded mounting hole) Flat head metric machine screws, Pozidriv (recommended) or Phillips, M3 x length
- RIVETS It is possible to use any aluminum 1/8'' or 3.2 mm 90° countersunk blind rivet. We suggest drilling a hole diameter of 3.3mm for the panel. It is possible to use pneumatic, electrical or hand riveting tools.